Skip to content Skip to navigation menu

Single Bowl Sink LH 935x485mm

Product Code: 141534

  • Accessories Included: Drainer
  • Number of Bowls: 1
  • Years Guaranteed: 10 yr
  • Height: 160 mm
  • Width: 485 mm
  • Length: 935 mm
  • Weight: 3.67 kg
  • Minimum Cabinet Size: 450 mm

Stainless steel satin finish single bowl sink with pre-cut holes for pillar taps. Supplied with high density sound deadening pads and foam sealing strip. Left-hand drainer model

Rating Snapshot (16 reviews)
5 stars
11
4 stars
0
3 stars
1
2 stars
1
1 star
3
16 reviews

Write a review

£29.60

In Stock

Available to order online.

Next-day delivery

Order by 6pm Monday to Thursday for next-day delivery.

Stainless steel satin finish single bowl sink with pre-cut holes for pillar taps. Supplied with high density sound deadening pads and foam sealing strip. Left-hand drainer model

  • Spacious satin finish single bowl sink
  • Punched 32mm diameter tap holes for pillar taps
  • Fitted with high density sound deadening pads
  • Supplied with foam sealing strip
  • Available with the drainer / bowl on either the left or right
Overall Rating
Rating Snapshot (16 reviews)
5 stars
11
4 stars
0
3 stars
1
2 stars
1
1 star
3
Quality

Value For Money

Write a Review
  • Sink Clips
    22 Mar 2014
    By brianh
    From Aylesbury
    Expertise: Moderate DIYer
    Quality

    Value For Money

    "The sink itself is fine and the installation instructions are easy to follow but the retaining clips I found were totally useless."

    Was this review helpful to you? Yes 1
    No 0
  • 28 Feb 2014
    By JulieBee
    Expertise: Easy DIYer
    Quality

    Value For Money

    This customer did not provide a text review.

    Was this review helpful to you? Yes 0
    No 0
  • OK ish
    22 Apr 2013
    By techpaul
    From Reading
    Expertise: Expert DIYer
    Quality

    Value For Money

    Pros:  non-reversible, two holes for taps
    Cons:  poor clips warped only viewable once unpacked, not all fixing holes punched

    "Needed a non-reversible, two tap hole sink, this one of the few that fitted the bill. Most reversible sinks have a blanking plug for the front side that is often plastic not metal and wears/marks faster than main sink. Clips should be all metal clamps. Come off easily and often will not pull in a warped surface. Earth bonding point should be supplied with a fixing in the kit. Warped sink can only be seen once unpacked on a worksurface. At least one clip mounting point was NOT punched out, another was malformed. Currently on look out for a better clip to replace the ones supplied."

    Was this review helpful to you? Yes 13
    No 3
  • 11 Dec 2012
    By ductbob
    From Southwest
    Expertise: Expert DIYer
    Quality

    Value For Money

    "I wanted a sink with two tap holes and this is about the only one I could find. As it is pressed out from one piece of metal the result appears that the sink ends up slightly bowed and will not sit level on the work-top. The eight fixing clips are totally inadequate for fixing the sink to a worktop - they are not strong enough to pull the sink down level. If you do have to fit one take this tip. It is not a one person job. Kneel on the sink to press it down above the clips that your 'mate' is doing up underneath. I went back to the store and checked all the others in the rack and they were all bowed. Since then I have looked at other sinks from different companies and they are all the same. Probably the same supplier just different packaging. I think to stop any more adverse reviews the supplier should be made aware of the above points and previous reviews to rectify the situation. A starting point would be to supply one clip for every hole [16] and don't make them with any plastic content so the the customer can have confidence that the product is going to work. When the instructions say 'do not over tighten' and the thread strips without pulling the sink down it's a poor product."

    Was this review helpful to you? Yes 26
    No 0
1 2 ... 4 next >>

Where and when can Wickes deliver items?

Our 'standard' products are available for next-day delivery (depending on your location and when you place your order).

Wickes delivers 'standard' (non-Big & Bulky) products to mainland UK (Great Britain) addresses, and to The Isle of Wight. We are unable to deliver to other remote and offshore locations.

Please refer to our Postcode Matrix to check whether we can deliver to your area, and if next-day delivery is available.

All products are delivered to the kerbside of the delivery address.

Where our next-day delivery service is available, it applies to 'standard' products that are ordered Monday – Thursday before 6pm.

For orders placed on a Friday before 6pm, we will try to deliver 'standard' products the following Monday.

For orders placed between 6pm on a Friday and 6pm on a Sunday, we will try to deliver 'standard' products the following Tuesday.

Next Day AM delivery is available for only £5 extra

Saturday delivery is available for only £5 extra.

How much will it cost?

Up to £50
Next Day Delivery: £5.95
Next Day AM Delivery: £10.95
Saturday Delivery: £10.95


£50 and over
Next Day Delivery: FREE
Next Day AM Delivery: £5
Saturday Delivery: £5

This delivery information applies to 'standard' products ordered online or by telephone. Go to our Delivery Information page for full delivery details of all our products and delivery methods.

Returns & Refunds 

If you want to return your Wickes product for an exchange or refund, you can do so at any time up to 30 days after receiving it. 

Faulty or damaged products

In the unlikely event that a delivered product (including made-to-measure items) is faulty or damaged, we will exchange it or provide you with a full refund (including delivery charges), as long as we are notified of the product’s fault within 30 days of it being delivered to you.

You can arrange for the product to be collected, by ourselves or nominated carrier, or return the product to your local Wickes store, with proof of purchase.

Products not required

You can return Wickes products you do not require for a refund.

If you cancel your order within 7 days following the date of delivery, we will give you a full refund including delivery charges.

If you advise us of your proposed return within 30 days (but more than 7 days) following the date of delivery we will give you a full refund excluding delivery charges.

Made-to-measure products

Made-to-measure products may NOT be returned unless they are deemed to be faulty or have been damaged in transit.