Timber to Masonry Joist Hanger 50 x 225mm
Product code: 246014
Clearance
£2.50
Not available for delivery
Sorry, this product is not available for delivery
Product added for Click & Collect
Product has not been added for Click & Collect
FREE Click & Collect within 30 minutes
Nearest Store
More Stores
Quantity:
1
£2.50
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
Click & Collect from store within 30 minutes - FREE
A single piece timber-to-masonry hanger for building into the inner leaf of new external cavity and internal walls
Read more
Read less
Saved to Project List
Timber to Masonry Joist Hanger 50 x 225mm
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Click & Collect from store within 30 minutes - FREE
Product details
- Height: 225 mm
- Thickness: 2 mm
- Width: 50 mm
- Material: Pre-Galvanised Steel
- Finish: Galvanised
- Pack Quantity: 1
- Type: Joist Hanger
- Brand Name: Wickes
Features & benefits
- Single piece timber-to-masonry hanger for building into the inner leaf of external cavity and internal walls
- Wide masonry flange for masonry use of compressive strength 2.8N/mm² and above
- Manufactured from 2mm thick pre-galvanised mild steel to BS EN 10327: 2004: DX51D + Z600
- 75mm load bearing surfaces
- All hanger 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
- A minimum height of 675mm of set masonry must be in position above the supporting flange before any load is applied
- For lateral restraint an additional heavy-duty strap must be used
- Fix the joist in place using 3.75 x 30mm galvanised nails