Wickes Galvanised Joist Hanger 50 x 175mm
Product code: 246013
£2.60
Currently in Stock
Delivery
Next day available
Product added for Click & Collect
Product has not been added for Click & Collect
Click & Collect
Nearest Store
More Stores
Quant:
1
£2.60
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
A single piece timber-to-masonry hanger for building into the inner leaf of new external cavity and internal walls
Read more
Read less
Saved to Project List
Wickes Galvanised Joist Hanger 50 x 175mm
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Product details
- Height: 175 mm
- Thickness: 2 mm
- Width: 50 mm
- Material: Pre-Galvanised Steel
- Finish: Galvanised
- Pack Quantity: 1
- Type: Joist Hanger
- Brand Name: Wickes
Features & benefits
- Single piece timber-to-masonry hanger for building into the inner leaf of external cavity and internal walls
- Wide masonry flange for masonry use of compressive strength 2.8N/mm² and above
- Manufactured from 2mm thick pre-galvanised mild steel to BS EN 10327: 2004: DX51D + Z600
- 75mm load bearing surfaces
- All hanger 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
- A minimum height of 675mm of set masonry must be in position above the supporting flange before any load is applied
- For lateral restraint an additional heavy-duty strap must be used
- Fix in place using 3.75 x 30mm galvanised square twist nails