Setcrete Latex Floor Levelling Compound - 20kg
Product code: 133779
15 for £345
£26.50
£1.33 per KG
15 for £345
Offer price equivalent to £23.00 per item
Currently in Stock
Delivery
Next day available
Product added for Click & Collect
Product has not been added for Click & Collect
FREE Click & Collect within 30 minutes
Nearest Store
More Stores
Quantity:
1
£26.50
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
Standard delivery
Click & Collect from store within 30 minutes - FREE
The Setcrete™ Latex Floor Levelling Compound is suitable for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is also suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared. Setcrete Latex can be applied at thicknesses between 2-10mm.
Read more
Read less
Standard delivery
Click & Collect from store within 30 minutes - FREE
Product details
- Size: 20 kg
- Coverage: 5.75 m2
- Application Thickness: 2-10 mm
- Drying Time: 24 hours
- Walk On Hardness Time: 2 hours
- Working Time: 15-20 minutes
- Colour: Grey
- Type: Floor levelling compounds
- Certifications Met: GEV-EMICODE¨ EC1PLUS R- very low emission
- Brand Name: Setcrete
Features & benefits
- An easy to use floor levelling compound, just add water in correct quantity as directed, mixing with a suitable mixing paddle and drill for a minimum of 2 minutes
- Setcrete latex is self-smoothing and can be applied at thicknesses between 2-10mm
- Drying is dependent upon the absorbency of the sub floor, ambient temperature, and humidity. However, after 2 hours it should be hard enough for you to walk on
- Before applying a floor covering, Setcrete latex should be left uncovered for 24 hours when applied at 2-5mm thickness. For more than 5mm it should be left for 48 hours
- Setcrete latex is suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete acrylic primer diluted in a ratio of 1-part primer to 4 parts water
- For non-absorbent sub floors, the surface should first be primed with undiluted Setcrete acrylic primer to promote adhesion
- The working time for use is approximately 15-20 minutes at 20°, depending upon the sub floor absorbency, ambient temperature, and humidity. Do not mix more than one bag at a time
- For further information and technical advice regarding the use of Setcrete latex, please email the technical services department – contact@setcrete.co.uk
- Always read the instructions