FloPlast 65mm Brown Square Downpipe Offset Bend - 112.5°
Product code: 431889
£3.35
Currently in Stock
Delivery
Next day available
Standard Delivery - From £4
The FloPlast Square Downpipe Offset Bend is used for making a 112.5° swan neck/offset from the downpipe outlet to the wall. The system offers a flow capacity in excess of round line gutter when removing rainwater from your roof. Suitable for new builds, house refurbishments, conservatories and extensions.
Read more
Read less
Saved to Project List
FloPlast 65mm Brown Square Downpipe Offset Bend - 112.5°
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard Delivery - From £4
Product details
- Standards Met: BS EN 607 & BS EN 12200
- Pipe Shape: Square
- Gutter Size: Standard
- Drainage Section: Downpipe
- Product Type: Fittings
- Diameter: 65 mm
- Material: PVCu
- Colour: Brown
- Pack Quantity: 1
- Years Guaranteed: 10
- Certifications Met: KM501316
- Type: Offset bends
- Manufacturer Model No: RBS2BR
- Brand Name: FloPlast
Features & benefits
- Manufactured in the UK from durable, lightweight PVCu
- This system is compatible with other plastic systems manufactured to BS EN 12200. Please see compatibility guide
- The lower end of the swan neck/offset should be secured using 431887 pipe clips. The pipe clip should be located on the joint between the offset bend and downpipe, using two 32mm x 65mm screws
- RAL Colour Mahogany/Van Dyke Brown 8016
- Easy to install