FloPlast 65mm Square Downpipe Offset Bend 112.5° - Brown
Product code: 431889
The 112.5° Brown 65mm Square Line downpipe offset bend is used for making a 112.5° swan neck/offset from the downpipe outlet to the wall. The system offers a flow capcity in excess round line gutter when removing rainwater from your roof. Suitable for new builds, house refurbishments, conservatories and extensions.
Read more
Read less
Saved to Project List
FloPlast 65mm Square Downpipe Offset Bend 112.5° - Brown
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Product details
- Depth: 118 mm
- Height: 70 mm
- Width: 70 mm
- Material: PVCu
- Colour: Brown
- Pack Quantity: 1
- Years Guaranteed: 10
- Certifications Met: KM501316 and BS EN 12200
- Type: Elbows
- Manufacturer Model No: RBS2BR
- Brand Name: FloPlast
Features & benefits
- Manufactured in the UK from durable, lightweight recyclable PVCu
- Zero waste to landfill from the manufacturing processes
- Recyclable packaging
- This system is compatible with other plastic systems manufactured to BS EN 12200. Please see compatibility guide
- The lower end of the swan neck/offset should be secured using 431887 pipe clips. The pipe clip should be located on the joint between the offset bend and downpipe, using two 32mm x 65mm screws
- Simple push-fit connection - no glue or mastic required for installation
- RAL Colour Mahogany/Van Dyke Brown 8016
- Easy to install