Softwood Ridged T&G Cladding 17 x 94 x 2400mm - Pack of 4
Product code: 345289
New
Product added for Click & Collect
Product has not been added for Click & Collect
Click & Collect
Nearest Store
More Stores
Quantity:
1
£25
Stores with both stock and Click & Collect near .
FREE Click & Collect in as little as 15 minutes from over 230 stores
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
This pack of Ridged cladding panels are produced from slow grown, European softwood timber and can be used for all internal applications. They can be easily installed horizontally or vertically to create the desired feature in any room using the T&G profile.
Read more
Read less
Saved to Project List
Softwood Ridged T&G Cladding 17 x 94 x 2400mm - Pack of 4
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
Product details
- Certifications Met: PEFC
- Standards Met: CE /UKCA : (BS)EN14915:2013+A2:2020
- Length: 2400 mm
- Thickness: 17 mm
- Width: 94 mm
- Interior or Exterior Use: Both
- Material: Softwood
- Colour: Natural
- Finish: Un-finished
- Profile: Ridged
- Pack Quantity: 4
- Type: Cladding
- Country Origin: Euopean
- Brand Name: Wickes
- Range Description: Cladding
- Made To Order: N
Features & benefits
- Modern, three-dimensional design can be fitted horizontally or vertically
- Planed surface for easy painting, varnishing or staining
- The width of each cladding is 94mm (including the tongue) and the face width is 81mm (excluding the tongue) covers XXX when fitted
- Timber has been kiln-dried for extra stability which reduces twisting
- Wickes recommends that cladding should be conditioned for a minimum of 72 hours in the room in which it is going to be installed and pack should be opened and laid flat
- When used externally, a suitable woodcare treatment is required
- Always keep clean and recoat all sides with a suitable preserver to help prevent splitting, warping and rot. Don’t just use the preserver on cut ends, use it in drill holes too in order to prolong the life of the timber
- All sizes are approximate
- Our timber used has been responsibly sourced