FloPlast 110mm Grey Soil Pipe Offset Bend Spigot/Solvent Socket - 135°
Product code: 158925
Product added for Click & Collect
Product has not been added for Click & Collect
Click & Collect
Nearest Store
More Stores
Quantity:
1
£14.50
Stores with both stock and Click & Collect near .
FREE Click & Collect in as little as 15 minutes from over 230 stores
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
The FloPlast Soil Pipe Offset Bend Spigot/Solvent Socket is generally used for changing the direction of 110mm soil pipe. This product is used as the bottom bend when forming an offset bend at the top of a soil stack with a bend used at the top bend. The bend has a spigot at 1 end which should always form the lower joint and a socket at the other end which should always be used to form the top joint.
Read more
Read less
Saved to Project List
FloPlast 110mm Grey Soil Pipe Offset Bend Spigot/Solvent Socket - 135°
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
Product details
- Product Type: Fittings
- Diameter: 110 mm
- Angle: 135°
- Material: PVCu
- Colour: Grey
- Pack Quantity: 1
- Years Guaranteed: 1
- Certifications Met: KM 544331
- Type: Soil bends
- Manufacturer Model No: SP435G
- Brand Name: FloPlast
Features & benefits
- Manufactured in the UK from durable, lightweight PVCu
- Changes direction through 135°
- Compatible with all UK 110mm plastic soil pipe manufactured to BS EN 1329-1 or BS EN 1453
- Silicone lubricant should be applied to the seals and spigot to help facilitate the joint
- When assembling the solvent weld end of the bend, apply solvent weld (product code 175692) to both the pipe and inside the socket. Push the pipe into the socket to the stop and slightly twist the fitting to form a good solid joint
- Easy to install
- Suitable for high temperature water discharges