FloPlast 110mm Terracotta Universal Gully Trap Socket - 45°
Product code: 432053
Product added for Click & Collect
Product has not been added for Click & Collect
Click & Collect
Nearest Store
More Stores
Quantity:
1
£14.50
Stores with both stock and Click & Collect near .
FREE Click & Collect in as little as 15 minutes from over 230 stores
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
The FloPlast Universal Gully Trap Socket is designed to form a water seal between the drainage system and open ends on the system to avoid unwanted smells. This includes open ends such as hoppers. The hoppers are sold separately and can either fit directly into the gully using a 435196 rectangular hopper, or by extending the height of the gully using the underground drainage pipe and fitting a square drain inlet. Additional straight couplings and/or bends will be required to connect the gully to the drainage system.
Read more
Read less
Saved to Project List
FloPlast 110mm Terracotta Universal Gully Trap Socket - 45°
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
Product details
- Product Type: Fittings
- Diameter: 110 mm
- Angle: 45°
- Material: PVCu
- Colour: Terracotta
- Pack Quantity: 1
- Years Guaranteed: 1
- Certifications Met: KM 544332
- Type: Gully trap
- Manufacturer Model No: D500
- Brand Name: FloPlast
Features & benefits
- Manufactured in the UK from durable, lightweight PVCu
- Compatible with all UK 110mm plastic drainage systems manufactured to BS EN 1401 or BS EN 13476-2
- Silicone lubricant should be applied to the seals and spigot to help facilitate the joint
- Easy to install
- Suitable for high temperature water discharges
- Suitable for gravity drainage and sewerage
- To obtain 'P' or 'Q' trap add a 45° or 87.5° bend