Setcrete Deep Base Floor Levelling Compound - 20kg
Product code: 133780
Product added for Click & Collect
Product has not been added for Click & Collect
Click & Collect
Nearest Store
More Stores
Quantity:
1
£25.50
Stores with both stock and Click & Collect near .
FREE Click & Collect in as little as 15 minutes from over 230 stores
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
Setcrete™ Deep Base Floor Levelling Compound is an easy to use high strength, high performance, floor levelling compound that is designed to raise floor levels by up to 50mm and to smooth uneven floors.
Read more
Read less
Saved to Project List
Setcrete Deep Base Floor Levelling Compound - 20kg
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
Product details
- Size: 20 kg
- Coverage: 2.2 m2 at 5 mm
- Application Thickness: 5-50 mm
- Drying Time: 6 hours
- Walk On Hardness Time: 1.5-3 hours
- Working Time: 20-30 minutes
- Colour: Grey
- Type: Floor levelling compounds
- Certifications Met: GEV-EMICODE¨ EC1PLUS R- very low emission
- Brand Name: Setcrete
Features & benefits
- An easy to use floor levelling compound, just add water in correct quantity as directed, mixing with a suitable mixing paddle and drill for a minimum of 2 minutes
- The versatility of the product means that it can be applied in one application to depths between 5mm and 50mm
- Takes 6 hours at 20° to fully dry so that floor coverings can be laid on top. However, after 90 minutes it is hard enough for you to walk on
- Suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete Acrylic Primer (sku no. 154148), diluted in a ratio of 1 part primer to 4 parts water
- For non-absorbent sub floors, the surface should first be primed with undiluted Setcrete Acrylic Primer
- The working time for use is approximately 20-30 minutes at 20°, depending upon the sub floor absorbency, ambient temperature and humidity. Do not mix more than one bag at a time
- For further information and technical advice, please email the technical services department – contact@setcrete.co.uk
- Always read the instructions