Skip to content Skip to navigation menu
Basket 0

Setcrete Rapid Setting Floor Levelling Compound - 16kg

Product code: 132009
£1.56 per KG
Out of stock online
Sorry, this product is out of stock online
Product added for Click & Collect
Product has not been added for Click & Collect

Our stock moves fast! Secure your product now with Click & Collect.
Nearest Store
More Stores
Check that you entered a valid postcode or place name.
Our stock moves fast! Secure your product now with Click & Collect.
Click & Collect from store within 1 hour - FREE
Setcrete™ Rapid Set 30 is a rapid setting, rapid drying floor levelling compound for use in light to heavy duty internal areas prior to the installation of new floorcoverings. Setcrete™ Rapid Set 30 utilises the latest advances in cement technology to achieve a walk-on time of as little as 30 minutes, and its rapid drying formula means that new floorcoverings can be installed from just 2 hours. As it is a water mix, it also offers the advantages of being economical and latex free.
Read more
Read less
Click & Collect from store within 1 hour - FREE
Product details
  • Size: 16 kg
  • Coverage: 5.6 m2 @ 2 mm
  • Application Thickness: 2 - 10 mm
  • Drying Time: 45 min
  • Walk On Hardness Time: 30 min
  • Working Time: 10 - 15 mins
  • Colour: Beige
  • Type: Floor Levelling Compounds
  • Certifications Met: GEV-EMICODE¨ EC1PLUS R- very low emission
  • Brand Name: Setcrete
Features & benefits
  • An easy-to-use floor levelling compound – just add water in the correct quantity as directed, mixing with a suitable Mixing Paddle and Drill for a minimum of 2 minutes
  • Setcrete™ Rapid Set 30 has excellent self-levelling properties and can be applied at thicknesses between 2-10mm
  • The floor levelling compound must be left uncovered for a minimum of 2 hours before installing a floor covering, when applied at 2 – 10mm. However, typically after 30 minutes it should be hard enough for you to walk on
  • Setcrete™ Rapid Set 30 is suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete Acrylic Primer diluted in a ratio of 1-part primer to 4 parts water
  • For non-absorbent sub floors, the surface should first be primed with un-diluted Setcrete Acrylic Primer to promote adhesion
  • The working time for use is approximately 10 - 15 minutes at 20°C, depending upon the sub floor absorbency, ambient temperature, and humidity. Do not mix more than one bag at a time
  • For further information and technical advice regarding the use of Setcrete™ Rapid Set 30, please email the Technical Services Department –
  • Always read the instructions
Data sheets
Customers' gallery