Vitrex LASH Tile Levelling System - Pack of 30
Product code: 223594
£8
Currently in Stock
Delivery
Next day available
Product added for Click & Collect
Product has not been added for Click & Collect
FREE Click & Collect within 30 minutes
Nearest Store
More Stores
Quantity:
1
£8
Stores with both stock and Click & Collect near .
Our stock moves fast! Secure your product now with Click & Collect.
Standard delivery - from FREE
Click & Collect from store within 30 minutes - FREE
Level, Align, Space and Hold tiles in place during installation with the quick and easy two part LASH Levelling System of Clips (A) and Wedges (B) designed to eliminate tile lippage/uneven tiles. Use the wedges for future installations. Achieves a 1.5mm grout line or can be used with additional spacers for a wide grout line. Replacement clips code 210072
Read more
Read less
Saved to Project List
Vitrex LASH Tile Levelling System - Pack of 30
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard delivery - from FREE
Click & Collect from store within 30 minutes - FREE
Product details
- Thickness: 2 mm
- Pack Quantity: 30
- Type: Tile Spacer
- Brand Name: Vitrex
- Range Description: LASH
Features & benefits
- Pack contains 30 Clips (A) and 30 reusable Wedges (B)
- Use with tiles between 6-12mm
- Minimal effort to install and remove
- Prevents tiles from moving during installation
- Level, align, space and hold (LASH) tile in place to prevent lippage and ensure a consistent finish
- Can be used with normal spacers for a wider grout line
- Replacement clips available, product code 210072
- Can be used with normal spacers for a wider grout line
- Suitable for medium and large format floor tiles
- User Tips: 1. Apply setting material according to manufacturer’s instructions. 2. Slide two clips(A) under the tile approximately 50mm from each end of the tile. NOTE: can be used in conjunction with normal tile spacers if a wider grout line is required. 3. Place the next tile. 4. Slide a reusable wedge(B) into each clip. Tighten until tiles are snug against bottom of the wedge. Adjust tile so that the sides are aligned and tiles are pushed tightly against the clip. 5. Let adhesive dry as required by manufacturer’s instructions. 6. Once tiles are set, simply kick or use a non-marking rubber mallet on the side of the clip to snap them off and keep the reusable wedges. "