FloPlast 68mm Anthracite Grey Round Offset Bend - 112.5°
Product code: 236373
Product added for Click & Collect
Product has not been added for Click & Collect
Click & Collect
Nearest Store
More Stores
Quantity:
1
£3.80
Stores with both stock and Click & Collect near .
FREE Click & Collect in as little as 15 minutes from over 230 stores
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
The FloPlast Round Offset Bend is used for for making a 112.5° swan neck/offset from downpipe outlet to the wall. It offers good flow capacity when removing rainwater from your roof, suitable for new builds, house refurbishments, conservatories and extensions.
Read more
Read less
Saved to Project List
FloPlast 68mm Anthracite Grey Round Offset Bend - 112.5°
added to "My Project List".
You are not logged in to save your list permanently. Until you log in, your list will be saved temporarily and can only be accessed from the device you are using now.
Standard Delivery - From £4
Click & Collect from store in as little as 15 minutes - FREE
Product details
- Standards Met: BS EN 607 & BS EN 12200
- Pipe Shape: Half round
- Gutter Size: Standard
- Drainage Section: Gutter
- Product Type: Fittings
- Diameter: 68 mm
- Material: PVCu
- Colour: Anthracite grey
- Pack Quantity: 1
- Years Guaranteed: 10
- Certifications Met: KM501316
- Type: Offset bends
- Brand Name: FloPlast
Features & benefits
- FloPlast 10 year colour and performance guarantee
- Manufactured in the UK from durable, lightweight PVCu
- This system is compatible with most plastic systems manufactured to BS EN 12200
- The lower end of the swan neck/offset should be secured with a pipe clip. The pipe clip should be located on the joint between the offset bend and downpipe, using two 32mm x 6.5mm screws
- Simple pushfit connection, no glue or mastic required
- Manufactured and Kitemarked KM501316 to BS EN 12200
- Easy to install