Wall Plugs

Ensure shelving, brackets, and fittings remain secure when installed on materials like plaster and brick with our wall plug collection. By creating an ‘anchor’ within a drilled hole, you’re given peace of mind that mounted loads are stable and secure. Say goodbye to wobbly fixes and hello to solid, professional results.

FAQs

How do you put a wall plug in?

Putting a wall plug in is simple. All you need to do is drill your hole, using the correct size drill bit for the plug, clear away the dust, tap the wall plug until it sits flush with the surface (use a hammer if necessary), and inset the screw into the plug and tighten. The plug will then expand and grip inside the material.

What size drill bit is best for a wall plug?

What size drill bit you choose depends on wall plug sizes and types:

• Red plug (5–6mm screws): usually a 6mm drill bit
• Brown plug (7–8mm screws): usually a 7mm drill bit
• Blue plug (10mm screws): usually a 10mm drill bit

How does a wall plug work?

They expand inside a drilled hole, gripping the surrounding material, whether plaster or cement, for a stable and secure fixing. Then when a screw is inserted, the plug widens, creating friction against the material for a much stronger fix compared to a standalone screw.

How do you choose a drill bit size for wall plugs?

All you need to do is match the drill bit to the plug’s outer diameter, not the screw itself. You can find this measurement by checking the plug’s packaging which will state a size like ‘6mm plug’. Then, choose a drill bit of the same size for a snug fit as opposed to being loose or overly tight.

Can I cut a wall plug to size?

It’s possible to cut a plastic wall plug, but this can impact how well it grips as plugs are designed to expand along their full length once a screw is inserted. With a cut, it may lose strength, fail once load bearing, or spin in the hole.